PUE improvement for people who aren't hyperscale
Power Usage Effectiveness (PUE) is the ratio of total datacenter power to IT load power. Hyperscalers hit 1.1. Enterprise datacenters average 1.6-1.8. Here's what's realistic if you're not Google.
What's possible at different scales
- Hyperscale (>10,000 sq ft): 1.1-1.2
- Enterprise primary DC (1,000-10,000 sq ft): 1.4-1.5 achievable with investment
- Enterprise secondary DC: 1.5-1.7 realistic
- Colocation: depends on facility, often 1.4-1.6
- Server closet: 2.0+ (no serious PUE story)
The cheap wins
1. Raise the setpoint
ASHRAE allows 80°F (27°C) for most modern IT equipment. Every 1°F rise saves 2-4% cooling energy. Set your facility to 78°F. Free savings, no capex.
2. Fix hot/cold aisle containment
Blanking panels on empty rack positions. Blanking on PDU sides. Floor tile placement matching airflow patterns. Cheap, often uncosted, significant impact.
3. Fix bypass airflow
Cold air short-circuiting back to CRAC units without cooling anything. Diagnostics: thermal camera survey, pressure sensors. Fix by: rearranging equipment, blanking unused openings.
4. Variable-speed fans
If your CRAC units are fixed-speed, they run full blast even when load is low. VFD retrofits pay back in 1-2 years.
The capex wins
5. Economizer mode
Use outside air for cooling when weather permits. In temperate climates, can run 6+ months of the year free.
6. Hot/cold aisle containment retrofit
Physical barriers around aisles. Big capex, big savings.
7. Liquid cooling for high-density racks
Rear-door heat exchangers or direct-to-chip. Paying off for AI workloads and other high-density.
Tools
- Cooling & PUE Estimator for the cost math.